PEUGEOT 504 Series 1970 Workshop Manual page 295

REAR AXLE
REAR CROSS MEMBER
REMOVAL
- Place the car over a pit or on a car lift.
- Unscrew the nuts securing the flexible hoses
of ihe rear brakes to the supports on the rear
floor .
- Remove the broke lines from their supports.
- Place a jock under the left hand lateral cross
member support in contact with it.
- Remove the rear seat cushion.
- Unlock the three nuts securing the cross
member.
- Remove the front securing nut.
- Raise the tab lock and remove the plastic
plug from the guide hole.
- Screw into the hole the guide
Kl
and t ighten iJ
using the bar K2.
· Leave the bar K2 in the 9uide hole.
· Remove the rear cross member securing nuts
and thrust washers.
· Lower gently the cross member until the bor is
resting on the floor.
- Corry out the s'lme operation on the right hond
side.
WWW.
Ea~
llC:l .orG
I
I