PEUGEOT 504 Series 1970 Workshop Manual page 350

0
w
\J
:>
w
c.
FRONT AXLE
TRIANGLE ARMS
REPLACING THE FLEXIBLE BUSHINGS
FRONT TRIANGLE REAR ARMS
REMOVAL
- Assemble,
in
order, on the oiled bolt 8.0907 A ;
- the drift C as shown opposite
- the inner silentbloc ring 1, of the arm 2,
- the ring E,
- the cup D,
- the nut for the bolt A.
- Hold the nut and tighten the bolt until the
silentbloc is withdrawn completely.
·Dismantle the apparatus and recovell" the si-
lentbloc.
REFITTING
- Smear with tallow the outer face of the silent-
bloc and the bore of the triangle arm.
- Place on the bolt A the following :
- the drift C as shown opposite,
- the silentbloc, 1, with the chamfer facing
downwards,
- the triangle arm 2,
• the ring E,
- the cup 0,
- the nut for the bolt A.
- Tighten until the drift C comes into contact
with the arm 2.
The correct position of the silentbloc in the arm
is obtained through the shape of the dr ift C.
- Dismantle the apparatus.
IZ·6S-.----------------------------------------------. . . . . . . . -----------------------------------------
Supersedes sheet class 6, poge 06 22 504 Workshop Manual • Rei. 1212 E