PEUGEOT 504 Series 1970 Workshop Manual page 433

BRAKES
REPLACING A REAR DISC
REFIT
- fit the disc to hub {ensure mating surfaces are
dean and free from burrs).
- a hole (a) mating with a hub hole.
WARNING :
TWO TYPES OF DISC
- J 0
m/m
thick disc fitted to ••thicles with calipers
type AH 12 MKI.
- J
2
m/m
thick disc fitted to vehicles with calipers
type AH 12 MK/Jl
- Mount each bolt (brushed clean) with :
· a new "Blocfor" lock washer
· a few drops of Loctite (standard grade).
- Torque bolts to, 36 ft/lbs. (5 m.kg.).
- Check the condition of the seals and bearing hou·
sing bolt in the event they require replacing.
- Ti!)hten the bearing housing nut
- Torque the nut to, 181 ft/ lbs, (25 m.kg.) using
the tools as illustrated.
- Do not lock the nut at this suge.
- Assemble hub/disc to beanng housing.
- Le.we tools (C1) and (C2) in position.
WWW.
Ea~
llC:l .orG
I
I