PEUGEOT 504 Series 1970 Workshop Manual page 261

N
~
DIFFERENTIAL
DISMANTLING
- Clomp front housing horizontally in vice.
- Install pinion nut box spanner N on drive p1n1on
nut and secure to stud
1
by means of a nut.
- Using drive pinion holding socket
M ,
slocken
nut . (Turn wrench clockwise).
H.B . - Th ere
is
no need to unlock the nut.
- Remove ·
- drive pinion holding socket M and pinion nut
box spanner
N.
- drive pinion nut.
- support plate
D.
- Drive the drive pinion out through the interior
of the housing using a press
if
necessary.
(Do not
hammer)
- Recover ·
- the front bearing 1
- the ad1usting spacer 2
- long spacer 3
- drive pinion and rear bearing
4.
WWW.
Ea~
llC:l .orG
I
I