PEUGEOT 504 Series 1970 Workshop Manual page 609

BODY BENCH
DESCRIPTION AND CHARACTERISTICS
ENS. 6010
ENS. 128
COMPOSITION OF THE ASSEMBLY
504 - SALOON
A - Sole p ate for supports B - C and towers D
B - Supports for checking the front suspension crossmember mounting holes
C - Supports for checking the main front crossmember mounting holes
0 - Telescopic towers for checking the upper front suspension mounting
E - Cross piece for gouge F ond supports G - H
F - Gouge for checking the gearbox tunnel
G - Supports for checking the front guide holes 1n the front floor
H - Supports for checking the position of the one piece sides
J -
Cross piece for checking the reor bulkhead guide holes
K - Cross piece for the supports M
M - Supports for ch ecking the rear guide holes of the front floor
N • Cross piece for supports 0 - P
0 • Supports for ch eck ing the rear suspension crossmember mounting holes
P • Supports for ch eck ing the position of the one piece sides
Q •
Supports for checking the rear spring hous ngs
R • R.H. support for the rear floor
S • L.H. support for the rear floor with centering for the fuel filler tube.
WWW.
Ea~
lllC'.:l .orG
I
I