PEUGEOT 504 Series 1970 Workshop Manual page 42

0
UJ
IJ
:;)
w
a.
ENGINE
CYLINDER HEAD · REMOVAL
WARNING · Removal of the head must only be
realised with the engine cold, to avoid any risk of
distortion .
- Drain the water from the block .
- Remove the components as shown opposite.
On KF 6 KF 5 and XN 2 engines :
• remove the injector lines (protect the delivery
valves and injector unions with caps).
·separate the air distribution chamber from the
inlet manifold.
- Disconnect the leads and hoses.
- Disengage the various lugs.
- Remove the plug tube seals and their cups.
- Separate the exhaust pipe from the manifold.
3.72 - - - - - - - - - - - - - - - - - -
WWW.~
C::J llCl .OrG
S upersedes page 04 13(1) and 04 14( 1), class 1.
1212
e