PEUGEOT 504 Series 1970 Workshop Manual page 182

0
UJ
\J
;:;)
UJ
0..
GEARBO X
RE-ASSEMBLY
- ~J
ll
·Rest the housing on the opposite side, so that
locking passage 1 is in vertical position.
- Install 3rd 4th and Reverse locking finger 2.
- Smear locking needle 3 with tallow and insert
it in the corresponding housing in 3rd/ 4th gear
change fork shaft
4.
- Re-install the gearbox support base in upright
posit ion.
- Install the following inside the housing :
• 1st/ 2nd gear change fork 5 {larger one), and
- 3rd 4th gear change fork 6.
- Insert fork shaft 4 until 1t 1s flush with ball
lock hole 7.
504 W orkshop Manuel •
R~f
1212 E
WWW.'!::ii CJ Cl .OrG