PEUGEOT 504 Series 1970 Workshop Manual page 310

REAR AXLE
REAR ARMS
• Raise the arm tak ing care that the spring
centres correctly in their housings.
·At the some time guide the antt·roll bar con·
necting link into position in the rear arm.
• Replace the two rubbe1 washers, the metal cup
and the upper shock ::>sorber securing nut.
• Fit the shock absorber ,., ithout t ightening the
lower securing nut.
• Tighten the upper shoe k a Ls orber nut to 9
ft .I
bs
(1
.25
m
.kg).
- Lower and remove the jack.
· Fit the rubber washer and meta I cup on the
anti-roll bar connecting link.
·Tighten the nut to 9 ft. lbs
{1.25
m.kg) .
• F it the rear arm :
• the rear broke flexible hose
• the hand broke cable
• Refit the half shaft following the method
indicated (Closs 5 page 02 05 and 06).
504 W orkshop M onual • R11I. 1212 E
WWW.
Ea~
llC:l .orG