PEUGEOT 504 Series 1970 Workshop Manual page 168

0
UJ
~
:J
UJ
Cl.
GEARBO X
DISMANTLING
- Reverse the position of the gearbox on the
support base, and firmly tighten al I the three
knurled bolts.
- Set control lever 1 to neutral and pull selector
lever 2 fully to the rear.
- Remove al I seven housing securing bolts (use
wrench equipped with 13 mm long socket,
Facom J
13 L.
- Remove rear housing, using a mallet
if
re-
quired.
·Remove :
all four Allen screws 3 on bearing lock plate
4 use a 6 mm Allen key, Facom
J
235/ ET
6,
·all eight half housings assembling screws,
·the upper housing.
- Lift off and remove gear and pinion assembly.
504 Workshop Manual • Rei 1212 E
WVIW. E. CJ llCJ .OrG