PEUGEOT 504 Series 1970 Workshop Manual page 164

GEARBOX
REFITTING
8
~llJ
• Refit :
·the clutch housing closure plates,
• the clutch release s love cy I inder,
· the steering gear housing {refer to class 7,
page 02 03).
• Secure the radiator to the front crossmember
and tighten to 7.2 ft.lbs (1 m.kg).
·Secure the heat dissipation plate under the
car floor.
• Refit the exhaust pipe assembly and use a
new «metol loplas tic» gasket.
• Secure the rear attachment 1 to the connecting
tube lug 2 as per drawing opposite.
• Ensure that the rubber ring 3 does not turn
while tightening nut 4.
·Using the two Allen screws equipped with new
Onduflex washers secure the differential to
the suspension crossmember.
- Tighten the bolts to 27 ft.lbs (3 .75 m.kg).
On 504 fuel inject ion
·Secure the electric fuel supply pump.
)04 Workshop Manuel • Ref 1212 E
WWW.!::::. c:J Cl .OrG