PEUGEOT 504 Series 1970 Workshop Manual page 219

D RJ VE SHAFT S
REM OVAL
- Raise the rear of the
co~
and chock it under the
suspension arm os shown opposite.
-·Remove the wheel
- Fit the hub holding tool
8.0521
A
on the hub.
- Slacken the hub nut without removing it.
- Remove the holding tool .
. Remove:
- the thrust spring
1,
- the retaining fork 2,
- the broke pods 3 .
- Open the broke line retaining clomp
4
on the
rear arm.
- Remove the Allen screw securing the col1per
using on 8 mm All en socket.
- Remove the coliper, without distorting the brake
I 1ne, and suspend it from the bodywork.