Table of Contents
Advertisement
FRONT AXLE
REMOVAL
• Re11ove the two nuts
1
from the anti-roll bor
connecting link pivots on the triangle rear arm.
·Leave the flat washers 2
in
position.
• Remove the two nuts 3 from the triangle rear
orm pivots on the main cross member.
·Raise the front of the cor carefully, with
a Pulley usmg o hoist chain mounted on the
I
jack guides, unti
I
the four pivot holes of the
front axle coincide with the holes on the appa-
I
rat•JS
8.1101
A.
• Position the apparatus
A
and tighten the nuts.
• Lower the
car
.
• Place the two thrust spacers
C
between the
eyelets of the triangle arm si lentblocs and the
track arm bosses on the front stub axles.
WWW.
Ea~
llC:l
.orG
Hide quick links:
Advertisement
Table of Contents
