PEUGEOT 504 Series 1970 Workshop Manual page 577

HUL L - F RON T PA RT
REPLACING A WI NG VALANCE , A FRONT PAR T
OF THE BUTTRESS AND THE FRONT FRAMEWORK
ADJUSTMENT AND ASSEMBL Y
(cont'd)
• F 1t the wing valance onto the telescopic tower.
- Spot weld :
with the assembly
[Q]
(e) • the top of the bulkhead
(f) • the valance corner ong le
to the wing valance.
- W 1th the assembly
[E:]
(g) - the shock obsorher reinforcement to the
connecting bracket.
- Place and hold with mole grips the front frame-
work. Check it s centering by taking 2 diagonal
reod1ngs between the front and rear fastening
holes of the front assembly D 1287
+
2.
- With assembly
~
Spot weld :
(h) • the connecting bracket to the wing valance
(i ) • the side brackets
(j) • the framework panels
on the front port of the wing valances
(kl • the lower brackets
on the buttresses
1
and on the wing va l-
ances (m).
(n) " the cross piece supports
(o) • the lower cross piece
to the lower port of the front framework.
- Remove the fastening bolts, raise the hull (.by
the door frames ).
- Remove the telescopic tower (new valance
side).
- Wi th the assembly
[ID
Spot weld
(p) - the buttress to the wing valance.
_. A5 odd111onol wo rk
Reploc1ng a conne cting brack e t
11.6666.
I
I