PEUGEOT 504 Series 1970 Workshop Manual page 348

b
UJ
~
:J
UJ
0.
FRONT AXLE
TRIANGLE ARMS
-
Lock the nut using the punch N
- Place on the steering swivel :
- the broke mounting 1, securing points on the
track arm side
- the broke disc shield 2.
- the grease nipple protector 3.
- Fit the bolts equipped with
new
Blocfor washers
and tighten to 40
ft.lbs
(5 .5 m.kg).
- Lock the bolts with a punch mark on the
threads protruding from the steering sw i ve
I.
- Place on steering swivel, the hub/broke disc
assembly.
- Fit the washer with the inner shoulder against
the inner race of the bearing.
·Use a
new
nut.
- Pre-tighten to
22 ft.lbs
(3 m.kg).
- Slacken the nut and tighten finally to
7,2ft.lbs
(l m.kg).
- Lock the nut in the two grooves provided,
using the punch
N
1
•
- Fit the hub nut cap after greasing with ESSO
MULTI PURPOSE GREASE H.
504 Workshop Manual ··Rei. 1212 E