PEUGEOT 504 Series 1970 Workshop Manual page 492

0
w
l.:J
::>
w
Cl.
FRONT SUSPENSION
DISMANTLING OF A FRONT SU SPENSION ELEMENT
• Remove the shock obsorber rod rubber boot.
·Hold the suspension element verticolly in o
vice.
·Remove the shock absorber closing nut using
socket G and on open ended spanner.
• Pull rod slowly so that oil does not splash and
remove rod and piston assembly.
·Then removing the following from the rod :
·support cup with rod seal 1.
• thrust washer and upper spring 2.
• "O" seal ring of bushing 3.
·Remove the rebound block using two tyre levers.
504 Workshop Monuol • Rer, 1212 E
WVIW. ~~lllC:J . OrG