PEUGEOT 504 Series 1970 Workshop Manual page 514

I
0
w
\J
:J
w
Cl
REAR SUSPEN SIO N
SUSPENSION CROSSMEMBER
Supersedes sheet closs 9, poge 1707 ond 1708
0 n~r
- Secure the differential to the suspension cross-
member using two Allen screws equipped with
new Blocfor washers.
- Tighten the screws to 27 ft.lbs (3.75 m.kg).
- Smear Molykote G over the onti-rol I bar bushes.
- Fit and secure the anti-roll bar under the body-
work.
- Install the petrol line rear securing clomp.
- Retighten the rear port of the exhaust pipe to
the bodywork.
- Seat two persons at the rear in order that the
flexible bushes be in neutral position.
- Tighten the following using o torque wrench :
- the shock absorbers lower pivot nuts to
33 ft .lbs (4.5 m.kg).
- the nuts of t he arm flexible bushes to 47ft .lbs
(6.Sm.kg).