PEUGEOT 504 Series 1970 Workshop Manual page 370

0
w
\J
:J
w
a.
e
I
STEERING GEAR
RE-ASSEMBLY • ADJUSTING
· Assemble on the thrust plote
in
the fol low ing
order :
· the grease nipple tightened to 7.2 ft.lbs
(1
m.kg).
·the shims determined during the previous
operation.
• the ny Ion stop.
·Place the plunger ond spr ing 1 n its hous ing in
the steering box.
• Secure the thrust plate assembly us ing the
two 7 mm dio bolts equipped with new Blocfor
washers.
Tighten the 2 bolts to 7.2 ft.lbs (1 m.kg).
- Grease the plunger with ESSO MUL TIPURPO·
SE GREASE H .
• Remove the eye from the rock on the opposite
end to the pinion.
• Fit the rock rubber boot.
Refit ond adjust the rock eye (20 to 21 mm
between the lock nut and the shoulder of the
eye).
504 W Ol'kshop Monuol
•
Ref. 1212 E
WWW.
Ea~
llC:l .orG