PEUGEOT 504 Series 1970 Workshop Manual page 615

EMS. 6010
EMS. 128.01
BOD Y BENCH
DESCRIPTION AHO CHARACT ER ISTICS
504.
SALOOM
COMPOSITION OF THE ASS EMBL Y
A • Sole plate for supports B-C and towers DZ
B • Supports for checking the front suspens ion crossmember holes .
C • Supports for checking the front moin crossmember holes.
DZ • T elescop1c towers w1 th spacers for checking the upper front suspension mounting
E • Cross piece for gouge F ond supports G- H-
F • Gouge for checking the gearbox tunnel.
G • Supports for checking the front floor guide holes.
H • Supports for checking the position of the one piece sides.
J • Cross piece for checking the rear guide holes in the bulkhead.
K • Cross piece for supports M.
M • Supports for checking the rear front floor guide holes .
Ho
1 •
Cross piece for supports 0 • P
0 • Supports for check1 ng the rear suspension cros smember mounting holes.
P • Supports for checking the position of the one piece sides.
Qo
1 •
Supports for checking the rear spring housings.
Rol .
R.H. support for the rear floor .
S pl •
l .H.
support for the rear floor with centering for the fuel filler tube.
u
v
w
} Set of fou, 20 mm thick, •ole
~otu,
'
I