PEUGEOT 504 Series 1970 Workshop Manual page 25

ENGINE
DISMANTLING
- Neutralise the spring action by locking the pad.
Reno Id tensioner
(3).
On XM - XM 7 and XN 1 engines :
- Remove the plug
(4).
- Turn the arming screw clockwise (3 mm alien key).
On KF 6 - KF 5 and XN 2 engines
- Use the pad retaining key.
Sedis tensioner (5).
- Turn the ratchet screw (a) anticlockwise.
- Remove the timing drive components.
- Remove the big end bearing caps.
- Remove the bearing shells.
Place the caps on the bench in the ir order of
removal.
WVIW.
E. CJ llCJ .OrG