PEUGEOT 504 Series 1970 Workshop Manual page 10

Supersedes page 02 0511), class 1 .
ENGINE
REMOVAL
- Place the gearbox support bar under the gearbox
and bring the centre bolt into contact with the
housing.
On 504 Automatic :
Remove the 4 bolts securing the convenor to
the flywheel.
- Disengage the convertor.
WARNING ·
Never remove the engine with the
convertor , make sure that the convertor remains
attached to the transmission.
- Separate the engine from the gearbox without
altering the position of the hoisting apparatus.
WWW.!::::. c:J Cl .OrG
1212 E