PEUGEOT 504 Series 1970 Workshop Manual page 61

ENGINE
CYLINDER LINERS - REFITTING
Select a base gasket for each liner which will give a protrusion of as close to 0.11 mm as possible
-
(minimum 0.04 mm).
WARNING - Only use ONE GASKET
per
liner.
HIGHEST POINT ON THE
LINER (Without gasked
from
0 .036
to
0.06
from O.Ql 1 to 0.035
from 0 to 0.010
Negative
reading
Reference
GASKET TO BE FITTED
Thickness
0.050
0.075
0.100
0.125
- Fit the correct gasket on the liner carefully.
- Engage the inner tabs (1)
in
the groove
in
the liner.
Position the tab with the reference mark on it (2)
at right angles to the flat (a) .
- Fit the liners with the tabs (2) in the position
shown opposite.
WVIW. E. CJ llCJ .OrG