PEUGEOT 504 Series 1970 Workshop Manual page 523

BODYWORK
REMOVAL
- Remove :
- the steering column flector securing bolt.
- the 2 Allen screws securing the steering box
to the cross member.
- Insert in the flector,
in
place of the bolt, o
6 mm centre punch.
- Disengage the steering column by rocking the
flee tor using the centre punch o s o lever.
- Remove the clutch control cylinder or slave
cylinder and place it on the battery cradle
without disconnecting the supply hose.
- Disconnect the gear change controls and re-
move the counter arm 1.
- Disconnect :
- the reverse light wires 2,
- the gearbox earthing wire 3 from the body
side,
- the speedometer drive
4.
- Remove the 4 bolts securing the heat dissipo·
tion plate to the floor.
- Disconnect :
- the petrol pipes from the tank.
- the rear broke flexible hoses 5 from the
pipes and disengage them from the supports
on the bodywork.
- Fit stoppers in the broke fluid pipes.
- Disconnect the coble 6 from the handbrake
counter lever.
WVIW. ~~lllC:J . OrG