PEUGEOT 504 Series 1970 Workshop Manual page 292

0
w
\j
:,)
w
a.
REAR AXLE
HUBS· HUB CARRIERS
0UlJ
- Remove the hub carrier nut using the spanner D,
held in place with the bolt
Cl
and the socket
K35 fitted on the extension K214.
- Extract the hub using tools as shown opposite :
- Recover :
- the hub/disc assembly
- the thrust pod CJ
- the bolt Cl
- Leave the extractor C4 in place.
• Remove the 4 Allen screws securing the hub
carrier to the arm
• PI ace the extractor pi ate B4 on the arm using
two of the carrier securing screws.
• Extract the hub carrier using the bolt Cl.
IMPORTANT
- For dismantling and reassembly of the rear hub,
thehub carriernut andtheoil seals,
see
class 5,
page 14 03 to 14 05.
504 Workshop Manual · Ref. 1212 E