PEUGEOT 504 Series 1970 Workshop Manual page 26

2.73
ENGINE
DISMANTLING
- Remove the p1s10ns/connec1ing rods.
- Remove the
b~anng
shells.
Assemble the connecting rods and their end r.aps
- Mark the rods 1 to 4.
Mark the position of the clutch mechanism
in
relation to the flywheel and remove the mechanism.
Remove
- the flywheel,
- the crankshaft.
Recover 1he halt thrust washers (6).
WARNING
XM/ZF · XM 7 · XN 1 and XN 2 engines
are also
fitted wtth two thmst
washers
in the
rear
main bearing cap.
remove the
main
bearing shells
Remove the cvllnder liners, using the extractor
0.0101 1f necessary.
WARNING • The cylinder block must never be
skimmed.
super~edes
page 03 05 (2) and 03 06° (1 I, class 1,
WVIW. E. CJ llCJ .OrG
1212 E