PEUGEOT 504 Series 1970 Workshop Manual page 299

REAR AX LE
REAR CROSS MEMBER
REF ITTING
- Ensure that all parts are clean and free from
all defect.
- If necessary assemble the cross member and
the lateral supports as indicated in class 5,
page
15 13.
- Thread the guides Kl into the cross member
supports.
- Pos i
I
1 on the cross member under the car floor.
- Engage the guides in their respective holes in
the outer s idemembers of the car.
- Raise the cross member in such a way as to
enable the insertion of the 2 bars K2
in
the
guides Kl from inside the car.
- Leave the cross member suspended from the
two guides.
- Reposition the rear arm articulations in the
yokes of the cross member using a tyre lever.
- Use the bars
J,
to pos 1tion the pivots os ind i-
coted (class 5, page
16
04).
- Fit new Nylstop nuts on the pivots without
tightening them.
WWW.
Ea~
llC:l .orG
I
I