PEUGEOT 504 Series 1970 Workshop Manual page 65

ENGINE
FLYWHEEL
REPLACING THE STARTER RING GEAR
TOOLS TO BE USED
8.0124
- Flywheel support for fitting the ring gear.
WARNING • The flywheel must be removed to
replace the ring gear.
REMOVAL
- Drive the ring gear off, away from the clutch
thrust side.
REFITTING
Mount the f lywheel on the base (clutch side
facing down).
- Heat up the ring gear using a blow torch.
- Position the ring gear with the champfered edge
of the teeth facing up.
- Using
a bronze drift, hammer the ring gear onto the
f
1
ywheel, until ir abuts on the support.
WVIW. E. CJ llCJ .OrG