PEUGEOT 504 Series 1970 Workshop Manual page 429

0273
096
BRAKES
REPLACING A REAR DISC
REFIT
- Assemble the disc
(3)
and hub, interposing the
defector
(4)
(ensure that all mating surfaces are
clean and free from burrs).
- Mount each bolt (brushed clean) with :
· a new "Blocfor" lock washer.
· a few drops of Loctite (standard grade).
- Torque bolts to, 36 ft/lbs. (5 m.kg.I.
- Replace the disc/hub assembly.
- The hub butting against the bearing, leave in posi·
t1on the tools
(Cl). (C2),
for checking run-out.
- Mount the dial indicator as shown.
- When rotated one complete turn the disc run-out
r"lust not exceed, 0,07
m/m.
- If this limit is exceeded, rotate disc, in relation to
hub, a 1 /4 or
1
/2 turn and re-check run-out.