PEUGEOT 504 Series 1970 Workshop Manual page 526

I
0
w
\j
::;;)
w
a.
BODYWORK
REMOVAL
- Remove bars
K2
and guide rods
Kl
from inside
the car.
- Simultaneously unscrew puller nuts B until
complete disengagement of guide rods
Kl.
Sepa rate t he front ax le from the bodywork.
- Remove both nuts ofthe anti -roll bar connecting
rod pivots 1 from the rear triangle arm.
- Do not remove t he flat wa shers 2.
- Remove the two nuts of the rear triangle arms
articulation pivot nuts 3 from the main cross
member.
- Progressively raise the front of the car through
the jock guides using hoist chain until the
front oxle four articulation pivots align with
the holding apparatus 8 . 11 0 1 A holes.
- Position the holding
opporotu~
A and tighten
the nuts.
504 WorkshopMonuol ·Rei. 1212 E
WVIW.
~ ~ .::::J
.OrG