PEUGEOT 504 Series 1970 Workshop Manual page 531

BODYWORK
REFITTING
At the front ·
- Fit the suspension elements six bolts
1
equip-
ped with new double tooth washers. Tightening
torque 7 .2
ft.
lbs
(1 m.kg).
- Install the main crossmember four attachment
bolts fitted with new Blocfor washers without
tightening.
At the rear :
- Place the rubber washers and the sheet metal
cups on the suspension crossmember two se-
curing studs.
- Fitthe nuts equipped with new Blocfor washers.
Tightening torque
23.5
ft.lbs
(3,25
m.kg).
At the front :
- F 1t ·he front cross member s 1x securing bolts
equipped with new Blocfor washers.
- Tighten the main crossmember four bolts
2
and
the two bolts M 12 3 of the front crossmember.
T ightening torque 31 ft.lbs
(4.25
m.kg).
- Then
tighten the four bolts M 10
4
of the front
crossmember. Tightening torque
27
ft.lbs
(3.75
m.kg) .