Confirmation Using Windows Device Manager - Epson RC90 User Manual

Maintenance 9. Troubleshooting

9.2.1 Confirmation Using Windows Device Manager

(1) Make sure that the development PC and the Controller is connected to the USB cable.
NOTE

(2) Click Windows-[Control Panel]-<Performance and Maintenance>.
(3) The [Performance and Maintenance] dialog appears.
(4) The [System Properties] dialog appears.
198
When checking the Controller connection using the Windows device manager, the
development PC and the Controller must be connected with the USB cable.
Click the <System> icon.
Select the [Hardware] tab and click the <Device Manager> button.
RC90 (EPSON RC+ 7.0) Rev.4