32-Bit Arm
®
Cortex
®
-M0+ MCU
HT32F50231/HT32F50241
Bits
Field
[3]
CH1NE
[2]
CH1E
[1]
CH0NE
[0]
CH0E
Rev. 1.00
Descriptions
Channel 1 Capture/Compare Complementary Enable
0: Off – Channel 1 complementary output CH1NO is not active. The CH1NO
level is then determined by the condition of the CHMOE, CHOSSI, CHOSSR,
CH1OIS, CH1OISN and CH1E bits.
1: On – Channel 1 complementary output CH1NO is generated on the
corresponding output pin determined by the condition of the CHMOE,
CHOSSI, CHOSSR, CH1OIS, CH1OISN and CH1E bits.
Channel 1 Capture/Compare Enable
- Channel 1 is configured as an input (CH1CCS = 0x1 / 0x2 / 0x3)
0: Input Capture Mode is disabled
1: Input Capture Mode is enabled
- Channel 1 is configured as an output (CH1CCS = 0x0)
0: Off – Channel 1 output signal CH1O is not active. The CH1O level is then
determined by the condition of the CHMOE, CHOSSI, CHOSSR, CH1OIS,
CH1OISN and CH1NE bits.
1: On – Channel 1 output signal CH1O is generated on the corresponding output
pin depending on the condition of the CHMOE, CHOSSI, CHOSSR, CH1OIS,
CH1OISN and CH1NE bits.
Channel 0 Capture/Compare Complementary Enable
0: Off – Channel 0 complementary output CH0NO is not active. The CH0NO
level is then determined by the condition of the CHMOE, CHOSSI, CHOSSR,
CH0OIS, CH0OISN and CH0E bits.
1: On – Channel 0 complementary output CH0NO is generated on the
corresponding output pin depending on the condition of the CHMOE, CHOSSI,
CHOSSR, CH0OIS, CH0OISN and CH0E bits.
Channel 0 Capture/Compare Enable
- Channel 0 is configured as an input (CH0CCS = 0x1 / 0x2 / 0x3)
0: Input Capture Mode is disabled
1: Input Capture Mode is enabled
- Channel 0 is configured as an output (CH0CCS = 0x0)
0: Off – Channel 0 output signal CH0O is not active. The CH0O level is then
determined by the condition of the CHMOE, CHOSSI, CHOSSR, CH0OIS,
CH0OISN and CH0NE bits.
1: On – Channel 0 output signal CH0O is generated on the corresponding output
pin determined by the condition of the CHMOE, CHOSSI, CHOSSR, CH0OIS,
CH0OISN and CH0NE bits.
354 of 486
July 31, 2018
Need help?
Do you have a question about the HT32F50231 and is the answer not in the manual?