Holtek HT32F50231 User Manual page 171

32-Bit Arm ® Cortex ® -M0+ MCU
HT32F50231/HT32F50241
Bits Field
[1:0] ADMODE
Rev. 1.00
Descriptions
ADC Conversion Mode
ADMODE [1:0] Mode
00 One shot mode
01 Reserved
10 Continuous mode
11 Discontinuous mode
171 of 486
Descriptions
After a start trigger, the conversion will be
executed on the specific channels for the
whole conversion sequence once.
After a start trigger, the conversion will
be executed on the specific channels for
the whole sequence continuously until
conversion mode is changed.
After a start trigger, the conversion will be
executed on the current subgroup. When
the last subgroup is finished, the conversion
will restart from the first subgroup if another
start trigger occurs.
July 31, 2018