Airbox - Inspection - Rotax 915 i A series Maintenance Manual

Figure 11.51
1 Intake manifold
3 Threaded bores
Step Procedure
4 Check contact and flat surfaces for Allen/
hex. screws, nuts and sensors.
• Indentations up to a maximum of 0.1
mm (0.0039 in.) are permissible.
• Bumps up to a maximum of 0.1 mm
(0.0039 in.) are permissible.
73–10–00
Page 30
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Injector bore
2
Figure 11.52
1 Contact face
AIRBOX — INSPECTION
Procedure
Step
1 Check the airbox for damage and wear.
2
Check the support plates for damage.
3
Check the connecting pieces for
brittleness.
4 Check threaded bores for damage.
Effectivity: 915 i A Series
Edition 0/Rev. 0