Disassembly Of The Overload Clutch Assy - Rotax 915 i A series Maintenance Manual

Figure 6.15
Extractor part no.
1
877615
Threaded pin of tool
3
276004
Step Procedure
6 Remove the needle bearing and oil inlet
flange by turning the extractor spindle.
7
Remove the O-ring.
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Extractor spindle
2
Needle bearing
1
O-ring
3
Figure 6.16
DISASSEMBLY OF THE OVERLOAD
CLUTCH ASSY.
For disassembly and assembly use a hand operated
hydraulic press or similar.
Step Procedure
1 Insert overload clutch into the insertion jig
part no. 276974.
Figure 6.17
1 Overload clutch
Step Procedure
2 Press clutch assy. with insertion jig part
no. 276974 until the circlip is free for
removal.
3 Remove the circlip using a small
screwdriver.
Oil inlet flange
2
Insertion jig part no.
2
276974
72–10–00
Page 13
August 01 2018