Removal; Torsion Shaft- Removal - Rotax 915 i A series Maintenance Manual

REMOVAL

For removal of the propeller gearbox, see
the relevant Maintenance Manual Line for
the respective 915 I A Series.
TORSION SHAFT— REMOVAL
NOTE
If the clutches can not be removed, then remove
the torsion shaft first.
Procedure
Step
1 Remove the clutches.
Figure 6.5
Propeller gearbox
1
Damper clutch assy.
3
Step Procedure
2 Remove the hex. screw M12x20 with
washer.
3 Remove the retaining ring with circlip pli-
ers. Remove the sealing washer and the
O-ring.
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Overload clutch assy.
2
4
Torsion shaft
Figure 6.6
1 Hex. screw M12x20
Retaining ring
3
O-ring
5
Step Procedure
4 Carefully knock out the torsion shaft with
a suitable punch.
Figure 6.7
Propeller gearbox
1
Plug tool
3
2
Washer
Sealing washer
4
6
Torsion shaft
2
Torsion shaft
72–10–00
Page 9
August 01 2018