Rotax 915 i A series Maintenance Manual page 165

Figure 6.61
Support ring
1
Steel friction plate 3
3
mm
Steel friction plates 1
5
mm (2 pcs.)
Driving collar
7
Step Procedure
10 Check position of clutch hub and align
with damper clutch assy.
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Disc springs (contrary)
2
Sinter friction plates (3
4
pcs.)
Spacer ring
6
Figure 6.62
1 Overload clutch
Procedure
Step
11 Insert centering ring part no. 276950.
12 Press damper clutch assy. with insertion
jig part no. 276952.
ATTENTION
The upper disk spring must not slip into the
groove of the retaining ring. Otherwise disk
spring will be damaged during compression of
the clutch.
Step Procedure
13 Insert circlip and release damper clutch
assy.
NOTE
Check the alignment of clutch hub
once again. It must be free to move.
Damper clutch assy.
2
72–10–00
Page 39
August 01 2018