Inspection And Servicing Intervals Of The Engine Components - Rotax 125 MAX evo Repair Manual

INSPECTION AND SERVICING INTERVALS OF THE ENGINE
Safety note
Inspect spark plug, replace if
necessary
Replace spark plug.
Check coolant level.
Inspect water pump for sealing, in the
event of egress of oil or coolant from
the overflow orifice, have the pump re-
paired by an authorised service center.
Inspect the cooling water connections
on the cooler housing and cylinder
head cover for tightness and sealing.
Inspect the radiator hoses and hose
clamps on the engine and radiator for
tightness and sealing.
Inspect the carburetor connections to
the engine and to the intake silencer
for tightness.
Clean the filter element in the intake si-
lencer and lubricate with air filter oil, re-
place damaged filter element.
Chapter 2
Page 10
BRP-Rotax
REPAIR MANUAL
COMPONENTS
Non-compliance can result in serious injuries or death!
All repair and maintenance work must only be carried out by a qualified technician.
Points of inspection
Inspection, remedial action
m WARNING
Interval
Operating
hours
as indicated
1) General
Inspect before
every operation
of vehicle
Every 25 hours
of operation
2) Cooling system
Inspect before
every operation
of vehicle
Inspect before
every operation
of vehicle
Inspect before
every operation
of vehicle
Inspect before
every operation
of vehicle
3) Carburetor and intake silencer
Immediately
after every
collision
Every 10 hours
(depending on
the conditions of
use)
Chapter
Reference
Effectivity: 125 MAX evo, Junior MAX
evo, Mini MAX evo, Micro MAX evo
Edition - February 01 2018 /Rev. 0