Fuel Pump Assy. Single Parts - Check; Fuel Pump - Inspection; Line And Hose - Inspection - Rotax 915 i A series Maintenance Manual

Figure 11.55
Throttle body assy.
1
3 Throttle valve
Rubber gasket ring
5
Step Procedure
5 Ensure that the throttle valve and the
Bowden cable can move freely.
6
Check that the fastening and securing el-
ements are secure.
FUEL PUMP ASSY. SINGLE PARTS —
CHECK
Preparation
Clean all parts carefully.
See Maintenance Manual Line for the en-
gine type 915 i A Series Chapter 05-00-00
section Procedures
Carry out a visual inspection.
See Maintenance Manual Line for the en-
gine type 915 i A Series Chapter 05-20-00
section Maintenance.
73–10–00
Page 32
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
2
Throttle shaft
4
Throttle cable
FUEL PUMP — INSPECTION
Step Procedure
1 Check the fuel pumps for damage and
wear.
ATTENTION
No longitudinal scratches are allowed on the
connections!
Figure 11.56
Fuel pump assy.
1
LINE AND HOSE — INSPECTION
Standard inspection
Procedure
Step
1 Check the lines and hoses for damage
and wear.
5 year exchange with new ROTAX® fuel pump
service kit
Procedure
Step
1 Check the ROTAX® fuel pump service kit
for completeness, damage and/or scratch
marks.
Effectivity: 915 i A Series
Edition 0/Rev. 0