Rotax 915 i A series Maintenance Manual page 464

Figure 21.5
Turbocharger flange
1
3 M8 hex. nut
5 M8x30 screw
Step Procedure
6 Slacken tension clamp but do not detach
or remove it from the muffler bracket.
Figure 21.6
1 Muffler
78–20–00
Page 6
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
2 Exhaust manifold assy.
4
Washer
Tension clamp
2
Step Procedure
7 Remove the Allen screw M10x50 (attach-
ment of the turbocharger bracket) togeth-
er with the lock washer and washer.
NOTE
This screw is sealed with LOCTITE
243.
8 Loosen the connection turbocharger
bracket - engine suspension frame (not
supplied with the engine).
Turbocharger bracket
1
3 Lock washer
5 Distance sleeve
Figure 21.7: TYPICAL
Step Procedure
9 Support the complete unit of exhaust -
turbocharger - manifold, remove the ten-
sion clamp and take off the complete unit.
10 Remove muffler assy. and turbocharger
bracket, see Chapter 78-10-00
Muffler assy. -
2
Allen screw M10x50
4
Washer
Connection turbo-
charger bracket with
6
engine suspension
frame
section
removal.
Effectivity: 915 i A Series
Edition 0/Rev. 0