Assembly; Fuel Pressure Regulator - Assembly; Airbox - Assembly - Rotax 915 i A series Maintenance Manual

ASSEMBLY

FUEL PRESSURE REGULATOR —
ASSEMBLY
The fuel pressure regulator is assembled and disas-
sembled in the same way. The following should be
noted.
Step Procedure
1
Lubricate the O-rings lightly with Lithium-
base grease.
Figure 11.57
Fuel pressure
1
regulator
Step Procedure
2 Install the fuel pressure regulator in the
pressure regulator housing until it stops.
3 Install the retaining ring.
NOTE
When the retaining ring is mounted, it must be
possible to rotate the fuel pressure regulator
manually.
73–10–00
Page 34
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Figure 11.58
Retaining ring 36x1.5
1
Pressure regulator
3
housing
AIRBOX — ASSEMBLY
Step Procedure
1 Secure the nipple with LOCTITE 243.
Tightening torque 5 Nm (44 in. lb.)
2 Secure the screw M6x12 and with LOC-
TITE 243.
Tightening torque 5 Nm (44 in. lb.)
2 Fuel pressure regulator
Effectivity: 915 i A Series
Edition 0/Rev. 0