SI-912 i-001R5 / SI-915 i-001
SI-912-016R10 / SI-914-019R10
This SI revises SI-912 i001R4/SI-912-016R9 and SI-914-019R9 dated 27 March 2017
Selection of suitable operating fluids for ROTAX
Type 912 i, 915 i, 912 and 914 (Series)
ATA System: 12-10-00 Operating fluids
1) Planning information
To obtain satisfactory results, procedures specified in this publication must be accomplished with
accepted methods and prevailing legal regulations.
BRP-Rotax GmbH & Co KG cannot accept any responsibility for the quality of work performed in
accomplishing the requirements of this publication.
1.1) Applicability
All engines of type:
1.2) Concurrent ASB/SB/SI and SL
None.
1.3) Reason
Introduction of the new engine type 915 i Series. Change of GAZPROM B-92 and B-92/115 from
Mogas to the aviation fuels.
1.4) Subject
Selection of suitable operating fluids for ROTAX
1.5) Compliance
According Maintenance Manual of engine type ROTAX
current issue.
m
m
1.6) Approval
The technical content of this document is approved under the authority of DOA ref.
EASA.21J.048.
1.7) Labor time
None.
1.8) Mass data
Change of weight - - - none.
Moment of inertia - - - unaffected.
1.9) Electrical load data
No change.
20 December 2017
Copyright - BRP-Rotax GmbH & CO KG. All rights reserved.
Engine type
912 i (Series)
915 i (Series)
912 (Series)
914 (Series)
Non-compliance with these instructions could result in engine damag-
WARNING
WARNUNG
es, personal injuries or death
Current valid documentation see:
www.FLYROTAX.com
SERVICE INSTRUCTION
Serial number
all
all
all
all
engine type 912 i, 915 i, 912 and 914 (Series).
®
®
Engine
®
912 i, 915 i, 912 and 914 (Series),
12-10-00
page 1 of 13
Need help?
Do you have a question about the 912 i Series and is the answer not in the manual?
Questions and answers