Rotax 915 i A series Maintenance Manual page 113

Figure 4.10
1 Tab
Fuse box (FUSE BOX)
See Chapter 76–50–00.
Step Procedure
1 Remove M5 hex. nut from the ground
wire on regulator A.
Remove Fuse box according to the aircraft
manufacturer's instructions.
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
2
Connection socket
Figure 4.11
1 FUSE BOX
Connector regulator A
3
Connector regulator B
5
Figure 4.12
1 Ground wire
Connector regulator A
3
Step Procedure
2 Mark the regulator connector before
detaching.
3 Push in the tab on the top of the connec-
tor and at the same time pull the connec-
tor out of the connection socket.
2 Regulator generator A
4 Regulator generator B
6
Ground wire harness
Regulator generator A
2
71–00–00
Page 19
August 01 2018