Airbox - Installation - Rotax 915 i A series Maintenance Manual

Step Procedure
3 Install the air intake hose (supplied by
manufacturer) on the throttle body assy.
with a clamp, and plug in the EGT
connector.
Figure 11.79
Throttle body assy.
1
3 Air intake hose
AIRBOX — INSTALLATION
Step Procedure
1 Install a new 1-ear clamp on the connect-
ing piece.
2 Insert the airbox in the connecting piece.
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
2
EGT connector
4 Clamp 60-80
Figure 11.80
1-ear clamps
1
Step Procedure
3 Fix the airbox with a new hex. nut M6 on
the ignition housing.
Tightening torque 10 Nm (89 in. lb.).
4 Crimp the 1-ear clamps.
Figure 11.81
1 Hex. nut M6
2 Connecting piece
2
Washer 6.4
73–10–00
Page 43
August 01 2018