Rotax 915 i A series Maintenance Manual page 454

INSPECTION
EXHAUST ASSY. — INSPECTION
Follow the aircraft manufacturer's instruc-
tions for inspection.
Step Procedure
1 Check the exhaust for cracks, dents and
leaks.
EXHAUST PIPE AND CYLINDER HEAD —
INSPECTION
ATTENTION
A deformed exhaust flange must be replaced!
Procedure
Step
1 Check the conical sealing surfaces in the
cylinder head and on the exhaust pipe for
deformation.
Figure 20.9
1 Conical seal
Exhaust pipe
3
78–10–00
Page 8
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
2 Exhaust flange
Figure 20.10
1 Conical seal
EXHAUST MANIFOLD ASSY. –
INSPECTION
Step Procedure
1
Check the exhaust manifold assy. for
deformation.
Figure 20.11
Exhaust manifold
1
assy.
2 Cylinder head
Flange for turbo
2
charger
Effectivity: 915 i A Series
Edition 0/Rev. 0