Rotax 915 i A series Maintenance Manual page 64

Figure 2.12
Generator coil A
1
(black connector)
Step Procedure
2 Pull out the orange latch with a needle
nose plier.
Figure 2.13
1 Connector
Needle nose pliers
3
Step Procedure
3 Bend back the retaining tab and at the
same time carefully pull on the cable until
the terminal is detached.
24–20–00
Page 10
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Generator coil B (gray
2
connector)
2
Latch
Figure 2.14
Retaining tab
1
Step Procedure
4 Pull off the rubber seal.
Figure 2.15
1 Cable
Filler plug
3
Step Procedure
5 Remove cable clamps.
6 Unscrew lock nut and remove the washer,
disk springs and distance sleeve.
7 Remove the adjustment screw and lead
through seal.
2
Screwdriver
2
Rubber seal
Effectivity: 915 i A Series
Edition 0/Rev. 0