Fuel Pressure Regulator - Disassembly - Rotax 915 i A series Maintenance Manual

Figure 11.20
Banjo bolt
1
Pressure regulator
3
housing
Step Procedure
6 Loosen the M5 Allen screws.
NOTE
1 M5x35 Allen screw. 1 M5x45 Allen
screw.
7
Remove the fuel pressure regulator and
housing.
73–10–00
Page 18
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
2 Gasket ring
Figure 11.21
1 Allen screw M5x35
FUEL PRESSURE REGULATOR –
DISASSEMBLY
Drain the fuel.
See Maintenance Manual Line for the en-
gine type 915 i A Series Chapter 12-20-00
section Planned maintenance.
Step Procedure
1
Remove the cable ties and pull off the air-
box reference hose.
2 Disconnect the plug connection to the
temperature sensor.
2 Allen screw M5x45
Effectivity: 915 i A Series
Edition 0/Rev. 0