Rotax 915 i A series Maintenance Manual page 51

Additional materials
No.
Effectivity: 915 i A Series
Edition 0/Rev. 0
MAINTENANCE MANUAL HEAVY
All metal and synthetic parts should be cleaned with suitable cleaning agents.
Before using new and unknown cleaning agents, check their compatibility with
the materials they are being used on.
Part no.
n.a.
1 Cleaning agent
Soak combustion chamber, piston and cylinder head
with cleaning agent and remove combustion residues
with a bronze brush. CASTROL "Clenvex 2000" has
proved very effective. It is a solvent - cold cleaner, free
of halogen, on the basis of selected fuel fractions and
is biodegradable. Never use caustic or corrosive clean-
ing agents.
n.a.
2 Multipurpose grease
Generally usable, neutrally colored multipurpose
grease, water resistant and highly adherent. Usable for
temperatures from -35 °C to +120 °C (-31 °F to 248 °F)
and can be subjected to high mechanical loads.
n.a.
3 Preservation oil
This special oil has excellent penetrating capabilities
and reaches even tiny gaps, its highly effective addi-
tives protect against corrosion of metal surfaces.
n.a.
4 Abrasive pad for surface finishing 3M Scotch-Brite
Multi Flex - very fine or ultra fine
Is sold by the meter and used for manual removal of
smaller rust spots or oxidation, especially for optimum
ground connections. It is particularly suitable for remov-
ing LOCTITE from surfaces or threads to make them
metallic clean. Before re-applying LOCTITE, clean sur-
faces with nitrothinner or degreasing agent (CASTROL
ZA 30 or OMV - SOFT SOL). When using solvents, ob-
serve the safety regulations for persons and the
environment.
BRP-Rotax
ATTENTION
Description, application Qty.
AR
AR
AR
AR
00–00–00
Page 31
August 01 2018