Pop Off Valve - Removal - Rotax 915 i A series Maintenance Manual

POP OFF VALVE — REMOVAL
m WARNING
Danger of severe burns and scalds! Allow the
engine and exhaust system to cool to ambient
temperature before starting work.
Before removal, check for function and
perform a leakage test, see Maintenance
Manual Line for the engine type 915 i A
Series.
Step Procedure
1 Loosen the hose clamp and remove the
low pressure hose.
Hose clamp
1
3 Valve cover
Figure 11.10
Step Procedure
2 Remove valve cover, spring and piston.
73–10–00
Page 14
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
2 Low pressure hose
Pop off valve
4
1 Valve cover
Valve piston
3
Figure 11.11
Procedure
Step
3 Loosen the 4 M5x16 Allen screws and re-
move the valve housing with O-ring.
1 M5x16 Allen screw
O-ring
3
Valve spring
2
Valve housing
2
Effectivity: 915 i A Series
Edition 0/Rev. 0