Rotax 915 i A series Maintenance Manual page 397

ATTENTION
Do not pull on the cable!
Figure 17.13
Fuel pump (main)
1
Connector (fuel pump
3
1)
Figure 17.14
Connector
1
(fuel pump 1)
Effectivity: 915 i A Series
Edition 0/Rev. 0
BRP-Rotax
MAINTENANCE MANUAL HEAVY
2 Fuel pump (auxiliary)
Connector (fuel pump
4
2)
2
Screwdriver
CONTROL UNIT (ECU) —
DISCONNECTION
See Chapter 76-10-00 section Control
Wiring harness designation:
• ECU LANE A1
• ECU LANE A2
• ECU LANE B
Step Procedure
1 Unplug the couplers (ECU LANE A1,
ECU LANE A2 and ECU LANE B).
Figure 17.15
Connector (LANE A1)
1
Connector (LANE B)
3
Step Procedure
2 Press in the lock so that the lever can be
rotated.
3 Press the lever down until it releases.
4 Remove the connector.
unit.
2 Connector (LANE A2)
76–50–00
Page 13
August 01 2018