Installation; Installation Of The Engine Suspension Frame; Finishing Work - Rotax 915 i A series Maintenance Manual

INSTALLATION

INSTALLATION OF THE ENGINE
SUSPENSION FRAME
ATTENTION
The engine suspension frame must be in-
stalled in a tension-free manner. Space out the
engine suspension frame with thrust washers,
as necessary to fill any gap.
NOTE
The Allen screws M10x110 must conform to
strength class 10.9.
The engine suspension frame are installed and re-
moved in the same way. See Removing the engine
suspension frame.
NOTE
Tightening torque of the hex screws 1x
M10x110, 2x M10x50 and 1x 10x35 is 60 Nm
(44 ft. lb.), all of them must be secured with
LOCTITE 243.

FINISHING WORK

• Install the water pump. See
• Install the coolant hoses. See
71–00–00
Page 28
August 01 2018
BRP-Rotax
MAINTENANCE MANUAL HEAVY
Chapter 75–00–00.
Chapter 75–00–00.
Effectivity: 915 i A Series
Edition 0/Rev. 0